Ready-Made Curtains Guide

2. Choosing the right size

Our curtains can be hung on a pole or track using curtain hooks (not included). There are three hook positions on the heading, allowing you to choose how your curtains sit against the track or pole. For example, if you're using a track you may want to use the middle or lower row of hooks to cover the track, whereas if you're using a pole you may want to use the top row of hooks, so the curtains hang below the rings Our 66 inches / 168cm width curtains will fit a curtain track/pole size 53-66 inches, or 134-168cm. Our 90 inches / 229cm width curtains will fit a curtain track/pole size 72-90 inches, or 183-229cm.

4. Hanging Instructions

Our curtains are pencil pleat curtains, and can be hung on either a pole or traditional track. Before hanging your pencil pleat curtains, double-check that they are going to fit. This may sound obvious, but when header tape has been pulled the curtains cannot be returned. Remember that pulling the header tape will shrink the width of each panel by around half so it’s worth checking beforehand. 1.Knot the cords together at one end of the tape to secure them. 2. At the other end, hold the loose cords and gently pull them. You might need to push the tape along the cords to help, and even out the pleats as you go.

3. Once you’re happy, knot the cords to keep them in-place but don’t cut them, just tuck them away. 4. Attach an even number of curtain hooks at equal distances to each header tape. 5. Hooks should have the tail end pointing down, so they can easily hook onto your track or pole. 6. Attach hooks through the eye of the pole rings, or to the gliders on the track.