How to Measure for your new Roman Blinds

For blinds that will hang inside your window recess, firstly remember that your blinds will sit in front of any obstructions including window handles, it's important that you take the measurements from where the blind will end up being installed.

Check that there is enough room in front of any obstructions for the blinds to fit in your recess, once you've checked where the blind will sit, its time to take your measurements.

Firstly measure your width, as accurately as you can, from wall to wall inside the space from the top where the brackets are to be mounted. Please bear in mind that the brackets and operating components will take up some of the space.  

Some windows are slightly less straight forward, for example, if you have tiles that cover some of the inside of the window recess; In this case it will be the space between the tiles you'll want to measure. The same applies if you have a picture rail or skirting board inside the recess. Take the smallest measurement as your width. 

Then do the same for the drop, measuring from the top of the recess down to the window sill, taking measurements from the left, in the middle and on the right, and note down the smallest measurement of the three.

You are now ready to order your made-to-measure blind - contact us to order using your exact measurements. 

Use this method when fitting a Roman blind onto the wall outside the window recess.

Assuming the window recess is fairly normal and you want to fit the blind outside the recess: Measure the width of the recess at the front edge, then you will want to add a little extra onto that - we recommend 5cm either side. 

Next do the same for your drop, measuring from the top of the recess down to the window sill, again you'll want to add a little to your measurement at the top of window sill - we recommend 7cm to allow ample space for the brackets to be fitted. 

If you have an architrave around the window simply measure the flat area of the architrave for the width and the drop. 

If you have a baton above your window, measure the full width of that, then measure the drop from the top of the baton down to the window sill.

You can now request a quote for your Roman blind with our 'request a quote' option on each Roman blind product page simply enter in all your details and we will get back to you with a price.